CAS No.107023-60-9

2- [ 2- ( Methacryloyloxy ) ethyloxy ] ethyl isocyanate

Karenz MOI-EG

Karenz MOI-EG has a new structure that gives flexibility as well as Karenz MOI structure. The double bond reactivity and Isocyanate reactivity are same level as KarenzMOI . And more, it balances flexibility with Strength.

Advantages　*Comparing with existing Karenz MOI

The hardening film using Karenz MOI-EG

Flexibility and Strength

Karenz MOI-EG balances Flexibility and Fracture strength which are contradicting properties.
Elongation is five times as large, while fracture strength is maintained at the same level.

【Condition】
Initiator: Irg184 2wt%
Rad. Energy: 500mJ/cm2

Adhesion Strength

Karenz MOI-EG can improves the adhesion strength to glass, metal, resin, etc.

【Condition】
Initiator: Irg184 2wt%
Rad. Energy: 500mJ/cm2

Cure shrinkage

Cure shrinkage is reduced by 40%.

【Condition】
Initiator: Irg184 2wt%
Rad. Energy: 1J/cm2

Curing

Curing rate is maintained at the same level.

【Condition】
Initiator: Irg184 2wt%

※All carried data are for reference. It's not a guarantee value.

Applications

Karenz MOI-EG is available for the following areas because of its high performance of Adhesion, Flexibility, photo-curing.

【For use】
・Adhesive　・Surface modification　・Paint coatings
・Resist (liquid, film, colored resist)　・Printing

※This product is only for industrial use. Please make contact with us, when you thing of other uses.

HANDLING AND STORAGE

Please read our SDS before using Karenz MOI-EG.

Handling

Educate handling personnel about the toxicity, the reactivity, and so on, of Karenz MOI-EG, regularly.
Prevents from the direct contact of Karenz MOI-EG to skin, eyes, clothes, and inhalation of vapor and so on.
Take off the clothes contaminated by Karenz MOI-EG at once, and dump them. Wash the contaminated area of skin with water adequate, with soap, and with water, again.

Storage

• Prevent from the contact with water, heat, strong base and the compound with active hydrogen (alcohol and amine).
• It reacts with the damp, and formate the insoluble urea and carbon dioxide. Notice the formation of urea, because it causes choke of pipes and valves.
• It is stored up in the cool and dark space.
• Use the container made of glass, the polyethylene and so on.

※*This information contained herein is based upon data considered true and accurate. However, Resonac Corporation accepts no responsibility or risk which may result from the handling and use of product or for infringement of any patent.